dsgsr
Well-Known Member
How expensive are the injector lines to replace? just bought a truck and they are pretty rusty.
Thanks
DaveG
Thanks
DaveG
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Dt466b
- Thread starter dsgsr
- Start date
dsgsr
Well-Known Member
Anyone ever done this? any idea?
DaveG
DaveG
Apparently not? It's not a real critical failure, so I suppose most people just wait until one rusts through, which is probably rare. If you suddenly lose one cylinder, make sure it's not spaying on the exhaust
I think that's pretty hard on a DT466.
I think that's pretty hard on a DT466.https://lacrosse.craigslist.org/grd/5977623019.html
You could try this guy. IF you have the same injection pump and injectors.
You could try this guy. IF you have the same injection pump and injectors.
dsgsr
Well-Known Member
Thank you for the replies. I think I have found a used set here in Maine, We'll see.
DaveG
DaveG
mike_belben
Well-Known Member
That engine is worth up to $3,000USD in guatemala as a core, so buy up every cheap spare you see before you need it.
There are crews of exporter smurfs buying up all the mechanical 466 trucks they can and chopping them at local wrecking yards then exporting the vittles. I know of one group that sends a boxtruck every 3-4 weeks. 6-7 cut trucks inside per haul. I used to trip over 466s until i needed parts.
There are crews of exporter smurfs buying up all the mechanical 466 trucks they can and chopping them at local wrecking yards then exporting the vittles. I know of one group that sends a boxtruck every 3-4 weeks. 6-7 cut trucks inside per haul. I used to trip over 466s until i needed parts.