BAD5oh
Well-Known Member
2010 s205 high flow. foot control machine and using a 12 pin plug on the aux hydraulics. Running a Erskine snowblower. The blower works fine when you hit the trigger. Everything there works as it should. Looking at both joysticks, the 2 inner buttons on each side that move up and down with your thumb are not working. So I have no movement turning the chute left or right and I cannot move the tip of the chute up or down. At the 12 pin plug there is only 1 pin with constant power and besides that I get nothing else when the two buttons are pressed up or down. Not sure if its where to start but all fuses are good and I checked the plugs in the back where a splice kit from the dealer was used to be able to use a 12 and a 7 pin plug