-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
jlg 800s leveling problem
- Thread starter yakout
- Start date
Rentalmechanic
Well-Known Member
Will need more detail if you want help, if the basket self leveling isnt working ? Usually the master or the slave is bypassing internally in the cyclinder themselves i usually get both repacked just cause no real way i found to see which is the cause but thats the only cause unless your relief is turned down at the main manifold
boomtech
Member
- Joined
- Nov 1, 2016
- Messages
- 21
- Location
- Quakertown,PA.
- Occupation
- Owner:AERIAL EQUIPMENT SERVICES LLC
The 800S uses angle sensors mounted by the rotator,there is no master cylinder on that machine.....do you have a JLG analyzer?....Chances are the cable that goes from the sensors to the upper control box is damaged.....also is the unit have a fault light on