boothybunch
New Member
Just brought myself a Compact wheel loader. An old Hough H-25B payloader. Have got pictures but unable to list at the minute
got a few problems that can be sorted out. Main problem i have at the minute is 1st gear doesn't work and 2nd gear drives but hills stall the machine. The transmission is Hydrostatic drive.
Got the service manual on order but would like to find the fault and see if I can cure it. hydraulic filter plugged???
Any suggestions would be great.
Just got my hands on a hough H-25B as a project and work horse.
Just need to sort out the 2 speed Hydrostatic Transmission. 1st gear doesn't work for some reason in forward or reverse and 2nd gear works but as soon as you get to a hill, it's stalls (engine is revving)
I have ordered a service manual But would like to put my finger on it. Had a quick look under seat and Never seen such a BIG valve block for transmission on such a little machine and feed and return hoses are 1 1/4" to 1 1/2"
Any suggestions would be great. Would post a picture but can't work out how to
Just brought a Hough h-25B payloader with bucket and forklift attachment.
Brillant piece of kit, apart from loss of 1st gear and 2nd gear drives but you hit a incline and you stall.
Not sure why and looking to see if anyone can help with suggestions. I have ordered a service manual but would like to get it to drive so i can park it out the way.
Someone did suggest the torque converter but I have got drive in 2nd so i would assume this is not the case.
There is some solenoids on the transmission valve block that are disconnected or wiring not brillant.
find enclosed some pics of the machine
got a few problems that can be sorted out. Main problem i have at the minute is 1st gear doesn't work and 2nd gear drives but hills stall the machine. The transmission is Hydrostatic drive.
Got the service manual on order but would like to find the fault and see if I can cure it. hydraulic filter plugged???
Any suggestions would be great.
Just got my hands on a hough H-25B as a project and work horse.
Just need to sort out the 2 speed Hydrostatic Transmission. 1st gear doesn't work for some reason in forward or reverse and 2nd gear works but as soon as you get to a hill, it's stalls (engine is revving)
I have ordered a service manual But would like to put my finger on it. Had a quick look under seat and Never seen such a BIG valve block for transmission on such a little machine and feed and return hoses are 1 1/4" to 1 1/2"
Any suggestions would be great. Would post a picture but can't work out how to
Just brought a Hough h-25B payloader with bucket and forklift attachment.
Brillant piece of kit, apart from loss of 1st gear and 2nd gear drives but you hit a incline and you stall.
Not sure why and looking to see if anyone can help with suggestions. I have ordered a service manual but would like to get it to drive so i can park it out the way.
Someone did suggest the torque converter but I have got drive in 2nd so i would assume this is not the case.
There is some solenoids on the transmission valve block that are disconnected or wiring not brillant.
find enclosed some pics of the machine
Attachments
Last edited by a moderator: