MBeard
Member
Does any one know the location of the compression release valve on a Komatsu, D65E-6 dozer. It is really hard to push the lever down and pull it up. It may need lubrication.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Comprssion release valve
- Thread starter MBeard
- Start date
dblaneyfan
Well-Known Member
Under dash, a little on right side:
MBeard
Member
I need to know where the valve or switch is located on the engine. I have to push a lever down to actuate the compression release and I can't see it on the engine. It has gotten really hard to push the lever down and to raise it. I have lubricated all the linkage I can see, no help
MBeard
Member
I need to see what the lever attaches to on the engine that decompresses it
SidewinderGlenn
Well-Known Member
If your engine is an older 855 Cummins ... it's on the front corner of the engine... I can't remember if it's left front or right front (I think it's on the left) .... but a normal hand pulled Cummins decompression lever should pull out AWAY from the engine for decompression.
I know our old D65 had an 855 Cummins ... but I don't seem to remember it having a Decomp . A few old trucks I've driven did.
I know our old D65 had an 855 Cummins ... but I don't seem to remember it having a Decomp . A few old trucks I've driven did.
MBeard
Member
I tried following the linkage, but I keep losing where it goes. I will try to get some help. That way they can work the lever up and down until I find it. It is hid somewhere, When I find it, I will let you know where it is.
Thanks for the reply's.
Thanks for the reply's.
dblaneyfan
Well-Known Member
Here is the parts breakdown for the compression release:
I can't find a picture that clearly shows the lever on the engine, but maybe this will be some help.
I can't find a picture that clearly shows the lever on the engine, but maybe this will be some help.
MBeard
Member
This really helps. I figured it would be on the back of the engine where I could not see it. I hope lubricating helps
You don't know how much I appreciate the time and effort you put in to do this for me.
Marvin Beard
You don't know how much I appreciate the time and effort you put in to do this for me.
Marvin Beard
MBeard
Member
You have to remove the hood, sides and everything else to see this,