• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

941 Tool Box Rebuild

Metalman 55

Metalman 55

Senior Member
Joined
Feb 6, 2013
Messages
1,301
Location
Ontario
Today I cut the old rotted tool box off of the inside of the door on the 941 & replaced with a new 16 ga. box. The old one was really rotten with holes through it. I was able to re use the top door for the tool box. Also made some new battery hold downs & put them on, as the batteries were just floating around in there when I got the machine a couple of months back.
20160109_164401.jpg20160109_164421.jpg20160109_164454.jpg20160109_164659.jpg
 
Metalman 55

Metalman 55

Senior Member
Joined
Feb 6, 2013
Messages
1,301
Location
Ontario
Hmmmmm.............if the first one lasted 43 years without a rubber liner, how old will that make me before it rusts out the 2nd time?:)
 
Metalman 55

Metalman 55

Senior Member
Joined
Feb 6, 2013
Messages
1,301
Location
Ontario
Nitelite said:
That is why he is Metalman, not Rubber man, but it could use some yellow coloring! Good job!
Click to expand...

The yellow coloring will most likely happen in the spring; winter wonderland out there now; big change from when this picture was taken just 5 days ago!
 
You must log in or register to reply here.
Top