• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Pivot Shaft

Cmark

Cmark

Senior Member
Joined
Jan 2, 2009
Messages
3,178
Location
Australia
It looks like clearance new is around .035". SEHS8972 says repair when combined wear in the bearings and shaft reaches 100 thou.
 
H

hargrove

Well-Known Member
Joined
Mar 16, 2011
Messages
65
Location
Perryville,Ar
7TL1203 We have .073 clearance and We have both roller frames off so we will make repairs now. Thanks for the info.
 
H

hargrove

Well-Known Member
Joined
Mar 16, 2011
Messages
65
Location
Perryville,Ar
Sent shaft to local Dealer which has a good machine shop , They are going to cut the shaft down and use undersize bearings.
 
You must log in or register to reply here.
Top