• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Tl130 won't start has coolant and low old psi light on

C

curtisb

Member
Joined
Aug 29, 2015
Messages
5
Location
Maryland
I have a tl130 turns over won't start .has fuel new filters everything .has warming lamps going off ,coolant and oil an also th one above it .any help thanKS .need to get this thing running for my company
 
stumpjumper83

stumpjumper83

Senior Member
Joined
Jan 13, 2007
Messages
1,979
Location
Port Allegany, pa
Occupation
Movin dirt
check your coolant level in the radiator, check your oil, if the problem remains, check your sensors, if its still not working and you need to move the machine, if you pull the fuse labled fuel monitor I believe, the dash will be dead, but the machine will run, or at least mine did.
 
C

curtisb

Member
Joined
Aug 29, 2015
Messages
5
Location
Maryland
Thanks for the help it ended up being the gauge assembly. Working in the rental industry iv never had one of these go bad never new about the relay in it till reading on here about it .I had checked the power to the fuel cut off and it was dead as soon I saw that I new it had to be the gauge assembly an sure if it wasn't
 
You must log in or register to reply here.
Top