• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

T110 fuse

Chass

Well-Known Member
Joined
Dec 6, 2013
Messages
65
Location
Adelaide South Australian
Occupation
Owner small earthmoving & landscape business
Hi all been off line for bit, but back again, now as you all know I had a RC30 now that has gone yah. I purchased a T110 Bobcat, now I have a problem with it, it blows the 5amp fuse. it has SJC controls 2 speed. The 5amp fuse seems to power up the control panel with the fuel guage,temp and all the loader buckets button, so when the fuse blows the machine shuts down and lose all function. But then I can start the machine but have no power to the dash to activate the loader etc hope this makes sense. IMG_2191.jpg
 

crewchief888

Senior Member
Joined
Feb 1, 2012
Messages
1,781
Location
NWI
Hi all been off line for bit, but back again, now as you all know I had a RC30 now that has gone yah. I purchased a T110 Bobcat, now I have a problem with it, it blows the 5amp fuse. it has SJC controls 2 speed. The 5amp fuse seems to power up the control panel with the fuel guage,temp and all the loader buckets button, so when the fuse blows the machine shuts down and lose all function. But then I can start the machine but have no power to the dash to activate the loader etc hope this makes sense. View attachment 139940

5a cab fuse i assume?
raise the cab,
check very carefully around where the wiring exits the bottom of the handle assy for a cut/abrasion on a wire. the wiring may be tie strapped to a mount,
i've seen several machines that the wiring is rubbing against the tube where the wires exit.


:drinkup
 
Top