queticoahl
New Member
I have a 650J dozer that is throwing a F3B3 code, does anyone know what that means?
Thanks
Thanks
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
650J lgp with F3B3 Code
- Thread starter queticoahl
- Start date
queticoahl
New Member
Moves for 10 minutes then just stops!!!! Shut off machine and it moves for 5 minutes, down to restart and wont move at all!
Blade moves but machine just stops when code appears.
As it warms up it moves for less time
Blade moves but machine just stops when code appears.
As it warms up it moves for less time
AndrewC
Senior Member
Its a park brake solenoid code. Check you solenoid or wiring to it
queticoahl
New Member
I tried replacing the solenoid! No luck! Looks like i start tracing wiring!!!!
queticoahl
New Member
Did you ever figure out the F3B3 problem? I have the same code.
I ended up replacing the entire computer board! fixed everything!
I had replaced the parking brake solenoid and retraced all of the wiring to it first.
Computer board was $$$$$.