• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

bobcat 773f aux hydraulics

B

bigsmoke

Active Member
Joined
Aug 21, 2014
Messages
27
Location
Canada
Occupation
Heavy equipment mechanic
Standard flow is roughly 17 gpm, high flow should be 20 or better
 
K

Killbox Alpha

Well-Known Member
Joined
Jul 5, 2014
Messages
85
Location
DFW
Who is the manufacture of the brush cutter? If you can contact the OEM, they will tell you what it takes to run their attachments.
 
B

bigsmoke

Active Member
Joined
Aug 21, 2014
Messages
27
Location
Canada
Occupation
Heavy equipment mechanic
Should be plenty if your hydraulic system has been maintained. Most brush cutters will specify a range of flow rate at a specific pressure for the width of cut. High flow attachments are out there, but standard flow will be much more common.
 
crewchief888

crewchief888

Senior Member
Joined
Feb 1, 2012
Messages
1,788
Location
NWI
new pump spec is approx 20gpm, used pump will probably flow approx 18-19 GPM

bobcat's 60" brushcat would work.


:drinkup
 
You must log in or register to reply here.
Top