JWJDM
Active Member
What's the spec.s on your new ride and trailer
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
ARPlante's Adventures
- Thread starter ARPlante
- Start date
ARPlante
Well-Known Member
- Joined
- Jan 16, 2006
- Messages
- 81
- Location
- Massachusetts
- Occupation
- Owner, secretary, estimator, mechanic, janitor
Trailer is a 2005 Fontaine 55 ton. The truck is a 2005 Kenworth W900L with a Cat C-15 bumped up to 600 hp. 3.91 gearing on 46 rears with an 18-speed transmission. Truck currently has 562,000 miles on it.
JWJDM
Active Member
Very nice set up previous owner took pride in the unit and from the looks of your equipment you will to. With 160 on back you probably forget it's on the trailer.
Blk prince
Senior Member
Question,from road building experience. Do you re sharpen bits yourself or use an exchange program?
ARPlante
Well-Known Member
- Joined
- Jan 16, 2006
- Messages
- 81
- Location
- Massachusetts
- Occupation
- Owner, secretary, estimator, mechanic, janitor
Ya, the 160 is not very noticeable on the back with that power on the truck.
In regards to the bits, we sharpen them ourselves and run them out that way.
In regards to the bits, we sharpen them ourselves and run them out that way.