• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

T200 blowing fuel solenoid fuse

willie59

Administrator
Joined
Dec 21, 2008
Messages
13,363
Location
Knoxville TN
Occupation
Service Manager
Since you have removed the spring and levers removed as you stated in post #16, it will run whenever you crank the engine regardless if you have harness connected or not. The only thing it won't do is shut down engine, you have to do that manually. ;)
 

T200

Well-Known Member
Joined
Feb 9, 2011
Messages
63
Location
MASS
Update.... New solenoid came in today and all is well. Total cost of $93 by purchasing one on amazon.com as opposed to the $373 price tag from bobcat. Thanks again for all of your help.
 

DieselFuel

Member
Joined
Jan 18, 2014
Messages
10
Location
Toronto
Willie....is there a photo you can post of the manual shut down lever at the injection pump say for the kubota engine?
thanks in advanced
 

crewchief888

Senior Member
Joined
Feb 1, 2012
Messages
1,781
Location
NWI
manual shutdown lever is located directly below the throttle lever .
throttle has linkage connected to it, the shut down lever doesnt.

kubota engine wasnt introduced until after the t200 went out of production. very early SN S / T 250's had the duetz engine. they werent in production long before the v3300 kubota replaced them.

:drinkup
 
Top