• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Skid Steer Pre Filters

NCPIPELINE

Senior Member
Joined
Mar 8, 2012
Messages
444
Location
Raleigh, NC
Occupation
The Fixer
Didn't someone put an outside the engine compartment pre filter on a skid steer a while back?
 

Swamp rat

Well-Known Member
Joined
Apr 16, 2009
Messages
114
Location
La / Ga
I installed a air cyclone to preclean the air to the air filter on a T190 couple months ago.
 

Rusty32

New Member
Joined
Apr 12, 2009
Messages
2
Location
dubuque
Ive done in to a deere 320. Went from filter changes every other day to every other service
 

durallymax

Senior Member
Joined
Jun 10, 2011
Messages
666
Location
Wi
Just did some quick browsing on Donaldson and Turbo pre cleaners sites. From the info I gathered the 3.4 Cat should need around 250CFM.

With those specs in mind and trying to keep overall dimensions not too large I found the following.

A Model 50 Turbo III would work.

http://www.turboprecleaner.com/pdf/turbo_sizing_datasheet.pdf

And the two donaldson topspin ones would work, but I think the inline one would be too bulky.

https://dynamic.donaldson.com/webc/WebStore/search/item_detail.html?section=10107&item=667616

https://dynamic.donaldson.com/webc/WebStore/search/item_detail.html?section=10105&item=1523394

https://dynamic.donaldson.com/webc/WebStore/search/item_detail.html?section=10105&item=156972
 
Top