20 ton tag with broken leaf spring

tracksfan · Dec 3, 2012

I got a 97 eager beaver 20 ton tag trailer with hutch 9700 leaf spring suspension, the back right spring has 2 of the 7 leafs broke so I'm going to replace it. Any advice on what I'm in for as far as fixing it? Should i replace both springs on that axle and can I reuse the ubolts, etc?

I haul my 315L on it and thats about as heavy a machine as that trailer wants in my opinion. Wish i bought the 25 ton.

Tiny · Dec 3, 2012

If you can afford it , Buy the U bolts and torch the old ones . That's 2 hrs saved right there . Same miles same roads , At least look at them REAL close

2stickbill · Dec 3, 2012

Most shops torch the U bolts.They could be weak.Would you rather replace them now or on the job in the rain and mud.

buckfever · Dec 3, 2012

I thought you had to always replace the u-bolts when you ever took them off. Something about when you properly torque them down they stretch the bolts and bend the threads.

Also I would replace both sides. Keep everything wearing equaly.

390eric · Dec 3, 2012

Yeah Ubolts are supposed to be one time use only. I don't think I would chance it, especially if you feel the trailer is already close to its weight limit with your 315.

tracksfan · Dec 4, 2012

thanks for the replies everyone. good advice that I will listen to

norite · Dec 5, 2012

A spring shop can make new leaves and u-bolts in no time and have you on your way. I usually leave spring work up to them, as they are quick, have or can make all the parts and are pretty reasonable as to price.

20 ton tag with broken leaf spring

tracksfan

Well-Known Member

Tiny

Senior Member

2stickbill

Senior Member

buckfever

Senior Member

390eric

Senior Member

tracksfan

Well-Known Member

norite

Senior Member