• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

td15ctrans/hydaulic filters

M

mwilliams

Member
Joined
Mar 30, 2010
Messages
16
Location
Saranac, Michigan
Occupation
We build GPS machine control systems, started in 1
Would someone be able to give us some info on filters for this machine? We are in Michigan.
We have been told that we should use HyTran Ultra, Is that correct?
 
EZ TRBO

EZ TRBO

Senior Member
Joined
Jul 21, 2007
Messages
862
Location
USA
Occupation
Aggregate Utility, Maintence Welder
you looking for the filter numbers? Or what fluid to run in the hyds? Always ran str8 10W when we owned them but company i work for now we get Donex TD fluid in bulk and run that in the hyd system
There are two canister filters for the hyd, plus a screen filter that gets cleaned and then of course the tank filter.

Trbo
 
Last edited:
M

mwilliams

Member
Joined
Mar 30, 2010
Messages
16
Location
Saranac, Michigan
Occupation
We build GPS machine control systems, started in 1
Thanks for the reply'
Looking for filter numbers first. We would like to find the filters before taking the old ones out, just in case we wreck them and they dont have any info on them.
Secondly, we have been told to use HyTran Ultra. Is that the proper oil or will others work as well?

Appreciate it,

Mark
 
EZ TRBO

EZ TRBO

Senior Member
Joined
Jul 21, 2007
Messages
862
Location
USA
Occupation
Aggregate Utility, Maintence Welder
Sorry bout not getting back to you sooner. I get time i will make a copy of what i have in the operators manual and a list of what we always ran. The Donex meets and exceeds, its good stuff(I belive it is a Shell equivilent, of the Donex TD) The filters shouldn't be a big issue as you should be able to get them easy enough, at a auto parts store.

Trbo
 
M

mwilliams

Member
Joined
Mar 30, 2010
Messages
16
Location
Saranac, Michigan
Occupation
We build GPS machine control systems, started in 1
Got all the fluids and filters changed. Ran a few hours and blew a few hoses. Setting on blocks at the moment waiting for new rails. Should be back in business next week. Generally runs good and not too bad to run. Any thoughts or advice appreciated.

Mark
 
D

Durt

Active Member
Joined
Jan 25, 2012
Messages
44
Location
British Columbia
Occupation
IH Mechanic
always always always!!!!! use series 3 10W oil in the hydraulic and transmission and 15-40 in the engine....been working on these for almost 30 years now. early 15s had the single pressure filter under the floorboard and the later have 2 filters under the panel by your left arm. I have service and parts and operators manuals for sale as well as all filters and anything else you would need...
 
M

mwilliams

Member
Joined
Mar 30, 2010
Messages
16
Location
Saranac, Michigan
Occupation
We build GPS machine control systems, started in 1
Durt,

I appreciate the info on the oil and filters. This one has the filter under the floor board.

How much are the manuals?

Mark
 
You must log in or register to reply here.
Top