• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Hough H60-D loader Hough H65-D

jdeere412

Member
Joined
Jun 19, 2011
Messages
7
Location
ohio
HEY GUYS,
i was wondering if someone could tell me if the loader arms-wishbone-and bucket are the same on a on a hough60-d to a hough h65-d, i have a h60-d and all the bushings are beat out, the loader arms have welded and rewelded, and my buckets junk, i found a h65-d with good loader arms wishbone and a decent bucket it looks the same but i'd feel better if someone could tell me if it will fit, especially since its 4hours away, any help would be appreciated.
thanks ryan
 

Kiwi Tussock

Active Member
Joined
May 27, 2011
Messages
26
Location
New Zealand
Hi there. I have had a 60B and have just the 65C and although I haven't checked them out side by side, I am pretty sure you will find the pin sizes different. I know the bucket on 65C is a 3 cubic metre (it had Greedy panels added to the sides of it to get that size but it has a major sized bucket compared to the 60B. which was standard.
Best of luck
 
Top