looking for air hose.

im looking for a few hundred feet of 2" air house for a pneumatic hammer and a 700cfm compressor. does anyone know a good place to find some?

What about your local hose repair shop?? or most of the hire companies here will hire or sell you any amount of 1" hose for a hammer.

Reference your search for 'hundreds of feet of 2in air hose'.

Suggest you check with whoever manufactured your air hammer to find out the maximum length of air hose (and diameter) needed to run the hammer correctly. If the air hose is too long the air flow though the hose will not be fast enough to run the hammer due to frictional losses in the air hose. Using a over size compressor will make no difference, the problem is the hose. Keep the hose as short as possible.

Regards

Heres are a few of places I have dealt with. The first one has been great to us for years. (hydraulic hose and assembly). There slogan is "Hose by the inch or mile". Good Luck.

http://hydraulichoseandassembly.com/

http://www.atlantarubber.com/

http://www.varcopumper.com/departments.asp?dept=55