• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Bridge Construction Pics

BRL

Senior Member
Joined
Oct 29, 2003
Messages
271
Location
Somerset, NJ
I'm not sure how many of us here get to work on projects like this, but I thought I'd share some pics from a different angle. On the way to go fishing around a month ago I took these. This is I believe a 6 lane bridge that will replace a 4 laner that had its better days.
 

Attachments

  • 43397_03.jpg
    43397_03.jpg
    10.9 KB · Views: 519

BRL

Senior Member
Joined
Oct 29, 2003
Messages
271
Location
Somerset, NJ
The smaller bridge happened to be opening as we were going through. I was told that is the 2nd largest of that type of bridge in the world, kinda fun to watch it spin around like that. They were letting one of the crane barges through at that time. I believe that is the highway that the new bridge is replacing, so another reason for the replacement is to avoid having the wait times for the openings.
 

Attachments

  • 43397_10.jpg
    43397_10.jpg
    14.1 KB · Views: 490

BRL

Senior Member
Joined
Oct 29, 2003
Messages
271
Location
Somerset, NJ
The object to the right of the flag is a medium sized excavator, but I forget if I was able to see what brand.
 

Attachments

  • 43397_15.jpg
    43397_15.jpg
    11.8 KB · Views: 478

Landman

Charter Member
Joined
Nov 14, 2003
Messages
16
Location
Rahway NJ
Occupation
Landscape, Excavating, Paving, & Snow Removal Cont
Boy oh boy bill, how you could be so close but so far you are only a few minutes away from this and you just saw this now? I have seen all the construction aspects of this bridge considering it is a major link for us to cross that river several times a week. Construction Equiptment Guide has wrote some aticles on this project This was the first bridge of this type to be built in the USA I beliveve it is called a compression bridge due to the natrue of its construction. The bridge they are replacing is actually going to a museum because it is the last turntable bridge used these days. When the old bridge is removed another span like the first one will be constructed in its palce and one bridger will be 3 lanes 35 south and the new one will be 3 lanes 35 north. It all will come together with a whole new overpass and croossover and will do away with the old victory circle. I was one of the first vehicles to be able to drive over that new span the day it opened it is like riding on a rollercoaster you actually notice you are going uphill at a steep angle in a short distance, I am curios to se how they handle ice control on this bridge it looks like it will be very slippery. Gotta give those guys at George Harms Constuction a lot of credit 3 bridges over the same span of river in just over 2 years.
 

digger242j

Administrator
Joined
Oct 31, 2003
Messages
6,644
Location
Southwestern PA
Occupation
Self employed excavator
Looks like you guys will have to get a pretty good run at it to jump that gap in the middle though.... :D

Great pics, Bill.
 

Landman

Charter Member
Joined
Nov 14, 2003
Messages
16
Location
Rahway NJ
Occupation
Landscape, Excavating, Paving, & Snow Removal Cont
Very funny! however I must tell you that that bridge is not only very steep and high but has a hell of a twist to it, you can't tell from the pictures but in the 1/2 mile span crossing the river it makes like a 60 degree bend. when I cross over it the next time if there isn't alot of traffic maybe i'll snap some pictures. gotta watch taking those bridge pictures nowadays big brother is always watching.
 

BRL

Senior Member
Joined
Oct 29, 2003
Messages
271
Location
Somerset, NJ
Oh I've been watching these bridges getting built with much awe for these past years, from below. Where I park to take my friend's boat is in the Harms parking & storage\equipment\supply area, under the Parkway & Route 9 bridges. This was just one of the times I wasn't piloting the boat, preparing tackle, or opening & steadying a beer to enjoy, and happened to figure out to pull the camera out to share my awe ;) Just thought it was cool that there was only that last little "jump" to go, and figured since we have this site now, there'd be a similar interest in seeing what I saw. I'll try to catch that curve next time. And the height is pretty incredible. Many of my pics are at full zoom & they still seem sooo far away lol.

That is not the only turnstyle bridge left actually. The next span to the East on our way to the fish is also the same type. It carries the NJ Transit RR Jersey Shore Line. I have some pics of that with the train rolling over us, I'll post some when I get a chance. I probably also have other pics of the bridge construction, &\or the already completed bridges from below, that I'll take a look for when I get a chance.
 

kamerad47

Well-Known Member
Joined
Feb 28, 2004
Messages
184
this is also the bridge where the contractor was lifting beams in & the load shifted & the beams end up in the water!!!!!:Banghead
 

Waterchikn

Member
Joined
Mar 13, 2004
Messages
9
Location
Grosse Ile, Mi
Occupation
Builder, renovations
Great pics, Bill. That bridge (the old one) is almost exactly like the one that I have to drive on everyday, as I live on an island. They are talking about building a new one, because of the dated one and the wait times when boat traffic is up. I wonder if they are going to do something like that! If they do, I will be sure to get pics of the process as well. Kinda cool.
 

swa

New Member
Joined
Oct 13, 2004
Messages
2
Location
belgium - antwerp
Occupation
all kind of machines operator
bridge building

let me show you how we build bridges in europe.:if the pictures dident get throu,please send me a request for sending the pictures by mail, of building the bridge at Milau ( france) now the biggest bridge in the world and made in 15 months!!!!!
 
Last edited:
Top