• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

410G problem

tuney443

Senior Member
Joined
Mar 19, 2006
Messages
1,216
Location
Dutchess County,NY
Occupation
excavating contractor
Anyone else besides me having problems with their 410G when it's really cold out? The issue is after she starts,the pilot controls,heater motor,horn,air seat, and some more functions--oh--tach stuck on 0 RPM's won't function.I believe there's some faulty relay{s] causing this as once I put some electric heat up in the cab,all was well.The morons at Nortrax aren't helpful at all.This has happened before during the warmer seasons,but only once in a while and if you shut the engine off and restart,everything's fine. Anybody?
 

JS580SL

Senior Member
Joined
Nov 3, 2007
Messages
558
Location
Massachuessetts
Occupation
operator
Only had ours a few months but have been using it in the coldest weather around here. So far so good. Im impressed with it and its winning me over from the old Case.
 

tuney443

Senior Member
Joined
Mar 19, 2006
Messages
1,216
Location
Dutchess County,NY
Occupation
excavating contractor
Same thing today happened but as I was checking the forward electrical control board behind the steering wheel,I pulled up the large positive red wire to the solenoid and la-la,I heard my heater motor come to life.It was tight on the terminal,maybe just wiggling it tells me now maybe it's that solenoid.
 

Steve Frazier

Founder
Staff member
Joined
Oct 30, 2003
Messages
6,608
Location
LaGrangeville, N.Y.
Before you replace the solenoid, check that the ground to the solenoid is clean, it won't activate without ground and by pulling on it you might have completed the circuit.
 
Top