-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Hydraulic cap and plug set
- Thread starter azvacs
- Start date
azvacs
Well-Known Member
AN Flat face or JIC, I don't know either. Maybe some help out there
azvacs
Well-Known Member
Amazon is out of stock and don't know when they are getting anymoreamazon has them quite affordable and a lot better than getting a job at a StealershipI have this one flat face and JIC has covered most stuff I run into
https://www.amazon.com/Hydraulic-Deluxe-Plug-Ring-Boss/dp/B07VYSGM28/ref=sr_1_3?crid=NGPC3MY6XJDH&keywords=flat+face+o+ring+cap+and+plug+kit&qid=1663975697&sprefix=flat+face+plug+kit,aps,372&sr=8-3&ufe=app_do:amzn1.fos.18630bbb-fcbb-42f8-9767-857e17e03685
skyking1
Senior Member
I went to the hose shop we have an account at, and kept getting more until I had enough to yank the boom. It was 99% flange with an oddball JIC tossed in. My preference was hard caps with O-rings, in case I wanted to run the machine which I certainly did. The plastic caps and plugs just become projectiles
I thought i'd have enough to do the rotek job but I had to go back for more little ones.
I thought i'd have enough to do the rotek job but I had to go back for more little ones.
