I have a question on the use of Ice Chains for added traction on soft ground. Mostly used for lot clearing pushing / grading sandy gravel material. Am I pushing the 4X4 system ? Could I be doing any damage to this hoe using these Ice chains just for additional traction? I keep speeds way down & constantly monitor Fluids.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Case 580 Super L Series 2 4X4
- Thread starter Squire
- Start date
Finca SDR
Well-Known Member
I dunno anything about doing any other damage except that you'll wreck your work site and farm roads or whatever. I'd make sure they weren't catching on your frame or fenders or axle housings or whatever very carefully, but if they clear with extra space go for it. But I wouldn't/havent because of the mess they'd make. I've definitely thought about it. They'd beat up a SOUP
1466IH
Senior Member
Keep a close eye on hydraulic and torque converter temperatures
I have not noticed any real concerns with my finished work. Admittedly, it's not the proper tool. Rubber wheels just don't cut it when clearing leftover tree & brush cuttings. Metal tracks & a good hydraulic thumb are what I could use right now.I dunno anything about doing any other damage except that you'll wreck your work site and farm roads or whatever. I'd make sure they weren't catching on your frame or fenders or axle housings or whatever very carefully, but if they clear with extra space go for it. But I wouldn't/havent because of the mess they'd make. I've definitely thought about it. They'd beat up a SOUP
Finca SDR
Well-Known Member
Every time I get annoyed with my backhoes capabilities I figure it's always easier than a shovel and a wheelbarrow.I have not noticed any real concerns with my finished work. Admittedly, it's not the proper tool. Rubber wheels just don't cut it when clearing leftover tree & brush cuttings. Metal tracks & a good hydraulic thumb are what I could use right now.
redneckracin
Senior Member
If the traction is poor enough that you need chains, I don't see the harm. I run all 4 wheels chained up on my tractor in the winter time, been doing it for over 10 years now with 0 issues.
westerner
Well-Known Member
If the traction is poor enough that you need chains, I don't see the harm.
We had chains for the backhoes and loaders at work. Not used nearly as often as on motor graders plowing snow. Damage occurs when they get loose, but not shucked off yet.....