• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Takeuchi TL150 aux

R

RoanokeMassey

Member
Joined
Apr 26, 2022
Messages
11
Location
Indiana
Working on a Takeuchi TL150.
I can not get the Aux hookups to couple.
This machine does not have any aux controls on the pilot handles. It does have a 2 way foot pedal on the right side.
I shut the machine off and then turned the key to the "run" position and rolled the foot pedal to try and dump the pressure off. But it did not help.
How do I dump the pressure to get the Aux lines to couple?
 
heymccall

heymccall

Senior Member
Joined
Feb 19, 2007
Messages
5,379
Location
Western Pennsylvania
One of my newer TL150 had this manifold on it.
So, I converted both of my older ones to it.
Screenshot_20220524-001021_Drive.jpg

Also, I dont believe Takeuchi made a TL150 w/o the electric auxiliary control. Maybe somebody modified your pilot handles. If you have the coils at #31-5-2, and you don't have the cab switches, you could always tie a momentary switch of 12 v to each coil to dump the pressure.
Screenshot_20220524-001228_Drive.jpg
 
R

RoanokeMassey

Member
Joined
Apr 26, 2022
Messages
11
Location
Indiana
Thank you for the info. Planting today. But as soon as it rains again, I am going to look it over.
I appreciate your help.
 
muddog1975

muddog1975

Well-Known Member
Joined
Oct 6, 2019
Messages
163
Location
knoxville tn
You may have pressure on the inplment hydraulic hoses, try cracking the lines on the implement before trying to hook them to the machine.
 
You must log in or register to reply here.
Top