dentdoc
New Member
I have a Genie Z45/25. Low speed quit working. I assume that high speed is two wheel drive only. It is on a job and we can't get it on trailer to bring back to shop. What controls high/low speed?
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
genie z45/25 travel speed
- Thread starter dentdoc
- Start date
OFF
Senior Member
well, those were pretty dependable old machines. I would be checking out the toggle switch in the basket to make sure it was still functioning.
After that, the manual has some good troubleshooting procedures in it you could check out.
After that, the manual has some good troubleshooting procedures in it you could check out.
ScottP
Active Member
- Joined
- Nov 15, 2019
- Messages
- 30
- Location
- Jayess, MS
- Occupation
- Shop Forman/Lead Technician/Truck Driver
WERE YOU ABLE TO FIX YOUR PROBLEM? JUST CURIOUS AS I HAVE VARIOUS TRAVEL ISSUES WITH THESE MACHINES(45s and65s) FROM TIME TO TIME..USUALLY DUE TO SOME HYDRAULIC OVERHEATING SOMEWHERE IN SYSTEM..THEY WILL BE FINE WHEN TESTING AT SHOP BUT GO HAYWIRE ON JOBSITE