• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Cat 320 DL No Start Condition 6.4 L Acert

A

Avidoutdoors

Active Member
Joined
Jun 24, 2021
Messages
26
Location
Iola,Tx
Crank no start condition, have fuel to the pump but no fuel rail pressure. Don't appear to have voltage at fuel solenoid on the pump. What is specified voltage? Does anyone have a service manual for this machine? CAT0320DVPHX00929
 
heymccall

heymccall

Senior Member
Joined
Feb 19, 2007
Messages
5,378
Location
Western Pennsylvania
If your proficient in using the monitor service menus, check to see if the RPMs are indicated while cranking. I believe that they are under "Status", then "Inputs".

My 314D (C4.4, same electronics minus 2 cylinders) lost the crankshaft sensor (no codes) and cranked but never turned on the fuel. Zero RPMs were shown while cranking.
 
A

Avidoutdoors

Active Member
Joined
Jun 24, 2021
Messages
26
Location
Iola,Tx
heymccall said:
If your proficient in using the monitor service menus, check to see if the RPMs are indicated while cranking. I believe that they are under "Status", then "Inputs".

My 314D (C4.4, same electronics minus 2 cylinders) lost the crankshaft sensor (no codes) and cranked but never turned on the fuel. Zero RPMs were shown while cranking.
Click to expand...
I do have rpm signal
 
You must log in or register to reply here.
Top