Brad Hansen
Member
2006 jlg 1930es lift. it was working fine when i parked it about 4 months ago in my workshop on clean and dry location. Tried to move it yesterday, turned key on and made sure both emergency switches 'out' (run position). Lift was completely dead-no lights, no horn, battery level lights, no solenoids clicking, nothing. So I thought batteries were completely dead maybe from some parasitic drain even though i had charged them completely when I parked it last. Plugged in the charger cord to extension cord and charging lights came on the jlg ground controller box, but no other sounds or noises when key turned on. This morning green charging light showed charging complete. Again turned key on and lift still completely dead. No solenoid noises, no lights, etc., no indication of power at ground control or platform control. Red safety buttons both on platform and carriage are in correct position. Checked battery voltage at power cables coming from the 4 batteries, 26.4 volts. Its like there is no power going to anything. I cant access the pump or where i think the solenoid would be located on the pump because the platform is down and I cant see/reach it. Where do i go from here?
Last edited: