• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Installing drive shaft in final drive d6n

K

KWhauling

Well-Known Member
Joined
Nov 12, 2018
Messages
49
Location
pa
I have a d6n cck00666 we had to pull transmission we can't get the drive shaft on the left side while sitting in seat in all the way we think we have the center shaft where it belongs any help or info is appreciated thanks Kevin
 
U

ugis

Active Member
Joined
Jun 20, 2021
Messages
31
Location
Latvia
I just did this and fought hard.
It will be enough for you to turn the driving sprocket a little with a large lever. Unless the track allows you to do so.
The wrong gearing is what prevents the shaft from being inserted.
 

Attachments

  • Screenshot_20211214-123551_Firefox.jpg
    Screenshot_20211214-123551_Firefox.jpg
    596.9 KB · Views: 19
K

KWhauling

Well-Known Member
Joined
Nov 12, 2018
Messages
49
Location
pa
Well we got it made a pipe up with the bolt welded on the end in order to get the center shaft where it had to be while we were pushing it in we turn the PTO a little bit and it went right into place then in order to get the left shaft in we had a bar and turn the sprocket a little bit and the PTO shaft again I want to thank everybody for the help
 
You must log in or register to reply here.
Top