• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

1845c runs bad at full/half throttle

C

carpenter

Member
Joined
Sep 11, 2021
Messages
11
Location
Kansas
Well it was a $1,400 gamble I guess, but I had replaced all the cheaper stuff, and It really seemed to be fuel system issue. If it didn’t work I was thinking possibly cracked head. I considered rebuilding it myself, but that would have been a mistake I’m fairly certain. Marc at DCT in Hutchinson, KS rebuilt it. I highly recommend him. He helped me troubleshoot before I made the final decision to rebuild.
 
M

Midnightmoon

Senior Member
Joined
Nov 9, 2013
Messages
445
Location
Ny
The governor comes apart and clogs up return check valve. Easy way to check is loosen up screws on side cover where you time the pump and run it. If it runs good pull check valve it will be full of governor material.
 
You must log in or register to reply here.
Top