• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Light Tower Series AL4000 Terex

B

Bullseye Beaver F.

Well-Known Member
Joined
Dec 7, 2017
Messages
117
Location
Ohio
This Terex, amida, light plant (tower), will run for about half an hour then all four lights go out at once, but the motor keeps running. Bulbs are good. Not sure where to look. Circuit breaker not tripped. Any help will be greatly appreciated.
 
J

JLarson

Senior Member
Joined
Aug 23, 2020
Messages
656
Location
AZ
Occupation
Owner- civil and heavy repair/fab company
Do you still have power out of the receps when it happens?
 
T

The Peej

Senior Member
Joined
Feb 6, 2012
Messages
333
Location
Connecticut
What do you do to get them on again? I would suspect the ballasts are shot. For the cost of a new ballast and bulb you can upgrade to LED's
 
B

Bullseye Beaver F.

Well-Known Member
Joined
Dec 7, 2017
Messages
117
Location
Ohio
Shut it off and let it cool down. Each light has it's own breaker so I am thinking that if it was a ballast they all 4 wouldn't go out at the same time. Does not trip the breakers. Let it cool down, same scenario.
 
You must log in or register to reply here.
Top