• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Woosterdelt

  1. W

    Bobcat T190 2004 2100 hours $23K opinions pros/cons ?

    Looking to but a 2004 Bobcat T190 2100hrs bucket and forks. This would be used on my hobby farm for moving the clay/dirt after having my pond dipped out, then other light duties. I have a Case 450 high lift and a Case 580D 2wd. Do I really need a skid steer? Called about it and it has no...
  2. W

    Case 580D started and ran great… then it didn’t

    Where do I get the rubber seals that go between the return line fittings? Do they have a special name so I can buy a pack on Amazon? Thx
  3. W

    Case 580D started and ran great… then it didn’t

    Tank was 1/2 full. My father suggested that I put more fuel in the tank since the driveway slopes down and the front wheels were slightly higher than the rear. I put 5 more gallons in the tank but it made no difference. Tinkerer: I have all the manuals, and thank you. OTC makes an injector...
  4. W

    Case 580D started and ran great… then it didn’t

    Well, it runs great now. Is the consensus diagnosis a failing injector(s)? I’m afraid to move it away from the garage until I figure out what happened. Easier to work on it there than back in the leanto on the pole building. I keep starting it expecting it to just crank again. Any special...
  5. W

    Case 580D started and ran great… then it didn’t

    Injectors tough to replace in a Case 207D?
  6. W

    Case 580D started and ran great… then it didn’t

    I put a new check valve in after I tried to start it with nothing in the top cap of the pump like “thepumpguysc” suggested. But tried to start it when I put it all back together with no luck. Try it an hour later after taking a line off at the pump and bam it starts. Makes no sense. Intermittent...
  7. W

    Case 580D started and ran great… then it didn’t

    Tinkerer, So, I cracked an injector line at the pump to check for what type of fuel pulse is coming from the pump. The engine started on 3 cyl. Re-connected the line, and the tractor starts easy without any cranking. Why? I’m happy it started, but don’t understand what happened. Concerned...
  8. W

    Case 580D started and ran great… then it didn’t

    Was at least able to use the starter to raise the loader from blocking access to the engine. Safety catch in place on the lift cylinder.
  9. W

    Case 580D started and ran great… then it didn’t

    Took out the check valve from the top of the pump leaving an open hole in the top cap. Turned over at full throttle. No start.
  10. W

    Case 580D started and ran great… then it didn’t

    I’ll give that a try after work today.
  11. W

    Case 580D started and ran great… then it didn’t

    Things tried today: remove intake hose from intake and try to start, run continuous 12V wire from battery to the fuel shutoff solenoid while trying to start. No success. I am awaiting a mechanic to have the availability to come out. Harvest time is a bad time to have a piece of equipment go...
  12. W

    Case 580D started and ran great… then it didn’t

    this solenoid seems to be cracked. I ordered another to replace it.
  13. W

    Case 580D started and ran great… then it didn’t

    I don’t mean to sound difficult, but how would the timing have changed? what I really need to do is hook up my remote starter leads so I can watch things at the engine more closely while cranking. Problem is, the starter that is on there has a guard over the ignition wires and I can not get the...
  14. W

    Case 580D started and ran great… then it didn’t

    This was an engine that always started within a second of hitting the ignition. Never needed a whiff of ether to start. I’m having a hard time believing that the pump is bad let alone the compression. I simply shut it off in the driveway, atraumatically. No stalling it out under load. Nothing...
  15. W

    Case 580D started and ran great… then it didn’t

    Pulled the valve cover. Every intact and in motion when cranking.
See more
Top