• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Woodbrothers

  1. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    So what would you recommend doing?
  2. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    I don't own the machine I'm the mechanic but don't work on a lot or excavators and most of the ones I do are Cats. They bought it with this problem and have ran it like this. They said after they run it for a couple hours it barely picks the bucket up. It doesn't make a lot of noise or wine at...
  3. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    Sorry pc120-6
  4. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    Steel
  5. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    Filter was full of metal. Who rebuilds them good?
  6. W

    PC150lc-6 weak tracking

    Did resealing your swivel fix your problems?
  7. W

    Komatsu PC120lc Low hyd power when hot & tracking problem

    Iv got a Komatsu Pc120lc that when trying to track it has low power and doesnt wanna move unless i barely pull back in the left boom stick. Also has low Hyd power when it gets hot. Any help would be appreciated. Thanks
  8. W

    Bucyrus Erie 45C Boom wont go down

    I have a Bucyrus Erie 45C Truck mounted crane. The boom will not come down on it. It Has a Valve body behind the Cab. On the valve for the boom lift it has one big line on one side that lifts the boom and that works. On the down line it has a small 1/2" HYd line that goes to a valve in the...
  9. W

    Bobcat T-250 Low Charge Pressure Issue

    Well about an hour before you replied I found in the book where it showed the charge pressure relief valve. Took it out and the face is very checkered up and scratched. Ordered a new one. Fingers crossed. When the machine has proper pressure does that send voltage to the bics valve on the hyd...
  10. W

    Bobcat T-250 Low Charge Pressure Issue

    Crewchief I am having some very similar problems with an S250 that i am working on. When the machine came in it was because it needed the fuel tank replaced. when i hopped in the machine to pull it in the shop the charge pressure light was on and it wouldn't operate the bucket. I called owner...
  11. W

    Cable Control Blades

    We have a 1955 D8 15A1137 serial number which makes it a torque convertor machine and makes it a series D machine. what is a D8G? which is a 15a also but was made in 1955-58? whats the difference between a series D and a series G? and im in the process of cleaning it up for a show in lathrop mo...
See more
Top