• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by William Rushbrook

  1. W

    524H Trans issues

    Of the codes that returned (3) my concern should be The 305 code first? F1658 was repaired when battery was found to be failed due to bad cell. This is where I am at with the machine now.
  2. W

    524H Trans issues

    DW544HX571646/ 15,250 hrs Trans codes list as 0389/1658/0305 Can anybody help with this code list?
  3. W

    650K Maint Reset

    John Deere 650K T0650KXCDE255022 I do not know how to reset the oil, fuel filter, hyd filter etc... in the front display.
  4. W

    624H Trans goes to neutral when operating, with a bang/thud.

    Ok fellas... here they are. I did take pics and can upload later today. F 1099 0588 0364 1664 0363 0362 1661
  5. W

    624H Trans goes to neutral when operating, with a bang/thud.

    When operating unit looses gears. Sets trans fault, turn off and restart unit and works again. How can i get the trans faults? DW624H571309 16,600 HRS Fluid is full and clean, no leaks no other concerns at this time.
  6. W

    Deere 450 won't idle down

    LC. 090333.
  7. W

    Deere 450 won't idle down

    Machine starts up and ramps up to full throttle without touching control knob. Not running away. 6cyl Turbo diesel.
  8. W

    CAT 252B

    I did have the floor plate up and inspected it thoroughly. No signs of corrosion. I am beginning to think that the front aux is only controlled via the thumb wheel. I am having a hard time understanding the Operators Controls file that was given. I did remove and Ohm the switches on the right...
  9. W

    CAT 252B

    Let me try this again. CAT 252B, Serial #SCP03809. Machine has been sitting for a month with no attachment, was called in to diag a no start. Upon inspection ( In the field ) found excessive corrosion in the fuse panel located under seat/footwell. Replaced fuse panel. Operates and charging...
  10. W

    CAT 252B

    0252BEASCP03809
  11. W

    CAT 252B

    Aux hyd inop. Fuse panel is new due to a prior no start
Top