• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by TylerB992

  1. T

    Skyjack 3220 No Function At All

    I have a Skyjack 3220 that has no functions working. All it does is beep but it won’t move forward, or backwards and doesn’t go up or down. I have confirmed the batteries are good. Each battery is 6.3V and in total it measures around 25-26V. What I did notice, is the contactor to turn on the...
  2. T

    Skyjack wheels turn but won’t drive or lift

    Thank you for this reply! I plugged the control box into the connector at the bottom and same thing. Can only turn the wheels. So this must mean it’s a problem inside the control box. So far all wires look good. No broken wires or loose connections. I have continuity all the way through. maybe...
  3. T

    Skyjack wheels turn but won’t drive or lift

    I have a skyjack 3220. Nothing worked. I replaced the joystick with a brand new one. Now the wheels will turn in either direction, but it will not move forwards or backwards in slow or fast speed. It also will not raise the platform. However the platform can be raised manually with the emergency...
  4. T

    JLG E-400A no boom controls

    I’ve read through almost the entire manual by now, still having the same issues :( Hoping someone else ran into this problem before and found a solution
  5. T

    JLG E-400A no boom controls

    Hello everyone! Looking to get some advice for troubleshooting an e-400a boom lift. When the key is set to ground control everything works perfectly fine. When you turn to the boom controls, nothing works on the boom. There is voltage in the boom control box. I’ve tested the cable for continuity...
See more
Top