• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Topman

  1. T

    JLG 40H engine issues...

    If you see my post in the telehandler section I had many issues with the engine not starting or starting but not staying running. I finally narrowed it down to the carb constantly flooding. There was a fuel pressure regulator installed but it was stuck wide open. After I cleaned and adjusted...
  2. T

    Genie 45/22 dual fuel won't start.

    Another update: After removing the carb and giving it a good basic cleaning I still had the "no start" problem. But what I noticed after installing the carb I could see it was flooding badly. This unit has a fuel pressure regulator and what I found out was that the regulator was stuck wide...
  3. T

    Genie 45/22 dual fuel won't start.

    Update:... This morning I went out to the boom lift and turned the key, hit the start toggle and it started immediately.?? It ran rough for a while and then smoothed out a little using the fast idle switch off and on. I adjusted the idle screw and also adjusted the auto choke. It continued to...
  4. T

    Genie 45/22 dual fuel won't start.

    Okay, this is my first post here. I have a Genie 45/22. I think it was built in 1999? I have had it for around 10 years and use it for work around our property pruning trees etc. It has never really run well but up until now it was mostly usable. Over the years I have managed to correct...
  5. T

    New to the group forum

    Thanks for the welcome. I would like to post a couple questions regarding my Genie boom lift. What would be a good category to post in? Thanks.
  6. T

    New to the group forum

    Thank you to those who host this forum. I have been reading and gathering all the information I can relating to my equipment. I currently have a small Yanmar tractor with loader and a small Kubota mini-excavator which both work well. But the one piece of equipment that I will need the most...
See more
Top