1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

Theweldor's Recent Activity

  1. Theweldor liked Delmer's post in the thread Uneven tire wear.

    If you have the hubs off, even better. measure those bare axles against each other and diagonally to the hitch or a measured point in...

    Nov 30, 2020 at 3:01 AM
  2. Theweldor replied to the thread Shrinking bores with heat.

    I know how that goes. You can't always fix it at the most optimum time. Everybody has to have a hamburger.

    Nov 30, 2020 at 3:01 AM
  3. Theweldor replied to the thread Shrinking bores with heat.

    The general rule of thumb is to have as much support at the bosses to equal the diameter of the pin. So if you have a 3" pin you should...

    Nov 30, 2020 at 2:57 AM
  4. Theweldor replied to the thread Shrinking bores with heat.

    I might add that I screwed myself out of quite a cash flow doing that. But did make some points!

    Nov 30, 2020 at 2:37 AM
  5. Theweldor replied to the thread Shrinking bores with heat.

    I do line boring for a company here. They have a 345 and a 365 that only run hammers. It used to be a yearly thing to bore them. The...

    Nov 30, 2020 at 2:15 AM
  6. Theweldor liked Truck Shop's post in the thread Readying for the KW.

    See Theweldor knows.;)

    Nov 30, 2020 at 1:39 AM
  7. Theweldor replied to the thread Readying for the KW.

    I think that Mack looks absolutely pristine with the color it wears now.

    Nov 30, 2020 at 1:36 AM
  8. Theweldor liked Truck Shop's post in the thread Readying for the KW.

    The only color he has is Cat Yellow a 55 gal drum.:)

    Nov 30, 2020 at 1:32 AM
  9. Theweldor replied to the thread Shrinking bores with heat.

    You can do as you wish. I have not a penny invested but that needs welded up and line bored. There is quite a ridge at the top of that bore.

    Nov 30, 2020 at 1:31 AM
  10. Theweldor replied to the thread Uneven tire wear.

    I would agree with Truck Shop..... and it is a pain in the behind measuring from the pin, but it is the only way to be sure.

    Nov 30, 2020 at 12:51 AM
  11. Theweldor liked Truck Shop's post in the thread Uneven tire wear.

    Think of the axle as moved in a arc.

    Nov 30, 2020 at 12:48 AM