• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Thesteeleboy

  1. Thesteeleboy

    CAT 262 skid steer HYD. problem

    Thanks for the support. You guy's are great
  2. Thesteeleboy

    CAT 262 skid steer HYD. problem

    I went out and got in the cab to take the bolts off to tilt the cab. After starting it, I raised the bucket about one foot, On the right hand control for the bucket, I pushed the toggle on top back and forth, as I did it sounded basically the some as when it was going in and out while traveling...
  3. Thesteeleboy

    CAT 262 skid steer HYD. problem

    I just moved it over closer to my house, while traveling I could hear it kicking in and out.,Once I got there I raised the boom and it was jerky in and out on the way up, when i tried to let it down it was bound up then started shuttering a little going down slowly, then drop fast for a ways and...
  4. Thesteeleboy

    CAT 262 skid steer HYD. problem

    Yes it bogs in and out while traveling but continues traveling and you can hear the engine bog somewhat. and I was wrong, the bucket function doesn't seem to be affected by it, only the lift and drop, the drop hangs up like the pins have rusted together and then break free allowing it to drop...
  5. Thesteeleboy

    CAT 262 skid steer HYD. problem

    yes but it kicks in and out sharply like an electrical problem in the hydrolics control or something and the bucket and lift functions stick like the boom has hit something and just stop while the engine is still running.
  6. Thesteeleboy

    CAT 262 skid steer HYD. problem

    Yes, while lowering/raising, yes while using bucket and yes while tramming the machine, but the machine continues to move you can feel it slow and feel the pressure increase and decrease while you're moving. After you stop you can hear the motor rpm change as the restriction kicks in and out.
  7. Thesteeleboy

    CAT 262 skid steer HYD. problem

    CAT00262ACED02487
  8. Thesteeleboy

    CAT 262 skid steer HYD. problem

    I have a cat 262 skid steer, Recently I got in and started it. It started and sounded good, I started running it and while setting still as I raised and lowered the bucket it started jerking like something was binding up trying to go up or down. I shut it down and then restarted it, before I...
  9. Thesteeleboy

    950 wheel loader

    Thank you; you guys are great
  10. Thesteeleboy

    950 wheel loader

    Thanks to all of you, your great help
  11. Thesteeleboy

    Sumitomo SH120 help

    Sorry for wasting your time with this post guys, I found the problem. The throttle cable broke, nothing electrical at all.
  12. Thesteeleboy

    Sumitomo SH120 help

    I have a sumitomo sh120, Its been running great. Today while traveling across the site, it slipped of a small rock causing it to bounce or jolt a little. It immediately shut down like you turned it off, now it turns over fine but wont even attempt to start. Any ideas where to start, it seemed to...
  13. Thesteeleboy

    950 wheel loader

    I have a operators service manual on its way Nige, It should be here in four days. Thanks for your support
  14. Thesteeleboy

    950 wheel loader

    The problem Im having with the steering is different than the 966. This one starts jerking back and forth while turning and also after you stop it sometimes continues jerking while the machine is articulated. Everything appears to be tight and its almost like the steering valve starts bouncing...
  15. Thesteeleboy

    950 wheel loader

    Thanks Nige, I got my shop manual for it yesterday but the fluid recommendations weren't in it. Thank You Nige Your Awesome.
See more
Top