-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Recent content by swmn dirt
-
S
2019 D6t blade functions quit working
Thanks all found the problem it was power to the main relay that was bad. Went to clean power cable coming from under fuse box to relay and the end that connects to positive terminal under fuse box broke off terminal end. Was looking at schematic and that main relay powers all the codes that I... -
S
2019 D6t blade functions quit working
Yes local gps antenna 1888-3 and cellular antenna 4682-3 were the other active codes besides the ones listed in above pic -
S
2019 D6t blade functions quit working
It has trimble earthworks gps. I have checked F 22,23,24,25 and F14,14 -
S
2019 D6t blade functions quit working
I was wrong there is codes and they all say voltage high -
S
2019 D6t blade functions quit working
2019 d6t serial k1r00205 was using and earthworks screen had the message -ignition switch powered off- then the earthworks screen went into powerdown mode and shut off. I then went to move blade with my joystick and all blade functions do not work. It will still move and steer but all blade... -
S
D6T- GMKxxxxx Hyd code showing up
If you ever have to pull seat again there is one bolt that keeps seat from sliding forward all the way (right in front). Remove that one bolt and seat will slide off base and it is way more manageable when you don't have to wrestle seat and base together -
S
D6T- GMKxxxxx Hyd code showing up
Thanks again, it trouble shoots as bad solenoid waiting on new solenoid from cat. -
S
D6T- GMKxxxxx Hyd code showing up
Thanks nige will trouble shoot and get fixed today -
S
D6T- GMKxxxxx Hyd code showing up
Where do you find the hyd pump boost solenoid is have same problem on 2019 d6t -
S
Terex Parts
I got lucky and took the assembly apart and there was a screw/bolt that fell out internally letting both balls that hold detent fall out of place also. Luckily everything was there and unharmed so just assembled it again and we'll see if it's a problem again, but for now it works.