• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Soo

  1. S

    Cat M318C cab problems

    CATM318CPBEB02032
  2. S

    Cat M318C cab problems

    Hello, More exactly the cabin doesn' work(rise or lower) neither mecanic or electric. If someone had similar problems, an advice would be appreciated. Thank you.
  3. S

    Cat M318C cab problems

    Hello, I have a CAT M318C at which the cab doesn't rise and neither lower. It looks like i can't identified the problem, after all the verifications i did. Any help/advice would be greatly appreciated Thank you
  4. S

    Gehl skidsteer pops breaker & dies

    Hello, I have the same problem with a GEHL 4840. Can you explain me the role of this solenoid valve more exactly? Thanks
  5. S

    GEHL 4840 starts and than suddenly stops

    Hello, Can somene help me regarding a GEHL 4840 which starts but the than after couple of minutes suddenly stops, and when this happen the fuse number four blows. Also if someone can help me with an electric schematic and fuse panel for this skid steer? Thanks.
  6. S

    Cat M318C panel monitor

    Hello, Tomorow i will verify, because I have waited also for the monitor to be repaired, but now it is working. The only problem is that one i connect the monitor the machine stops. Thanks.
  7. S

    Cat M318C panel monitor

    Hello, I didn't manage to solve the problem yet.The machine stops working for couple of seconds, the motor is working and then after this starts working normal. I manage to solve the problem regarding the monitor, but when i plug in the monitor the machine stops.Can someone give me an advice...
  8. S

    SKL 844 speed sensor

    Hello, Can someone help me with the location of the speed sensor on a SKL 844, because it seems i can find it? Thanks
  9. S

    Skl 844 wheel loader

    Hello, Can someone help me with a manual or electric schematic for skl 844 wheel loader? Thanks
  10. S

    Cat M318C panel monitor

    Thank you. I will check.
  11. S

    Cat M318C panel monitor

    Hello Here is a photo with error codes. I have noticed when E046 appears the machine stops working (for about 30~40 seconds) and than starts working again(for 5 min) and this problem is repeating. Thanks.
  12. S

    Cat M318C panel monitor

    Hello, Can someone help me with error codes for cat m318c? Thanks
  13. S

    Cat M318C panel monitor

    Hello. I verified this power modul and all seems to be ok on it. Thank.
  14. S

    Cat M318C panel monitor

    Thank you. I will verify this power modul.
  15. S

    Cat M318C panel monitor

    Thank you
See more
Top