• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by sleepyhollow

  1. S

    Roughest 580ck ain't moving!

    good luck freind !!! I think I finally have mine beat. I dismantled the clutch preasure releif in the shuttle control valve and the other preasure releif located next to the shutle control valve. Both were seized up. I cleaned and polished both and put it all back together, added the fluids and...
  2. S

    Roughest 580ck ain't moving!

    Hi guys, it was me who had the oil coming out of the breather. Here is what I found out. Hope it is helpful to you. In trying to resolve the problem I am dealing with, I seperated the shuttle control valve from the oil distribution plate. while doing this I apparently allowed the forward/reverse...
  3. S

    580ck shuttle/converter

    Thankyou. This is the same shuttle-converter/control that phil posted a scymatic of on page 1 of this thread. It is blowing oil by the quart. I ran it about 3-4 minutes and it blew out over a gallon
  4. S

    580ck shuttle/converter

    Hello folks, Im new here and having some trouble with my 580B. For some reason it is blowing transmission fluid out of the shuttle valve breather. Any ideas on this???????????
  5. S

    580K Boom Control

    Hi folks I'm new here. First time adding my two cents. My employer has a 2012 Kubota with the same problem. Im thinking in an older machine you may have worn out seals or even seal seats that is allowing fluid to pass through causing the boom to swing in this manner. Try to take notice, with the...
See more
Top