• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by sjs2011

  1. S

    T190 code 32-31

    Hi all, Lost all tilt on the bucked and got the dreaded actuator code today, swapped plugs and it changed to 32-36 so looks like it needs to be replaced. I was told if software was over 54 (mines 74) then I wouldn’t need calibration. Any info on this? Also is the lift actuator on the top or...
  2. S

    Bobcat T190 centering device issues

    Prior it was only on startup that you’d have to screw with it while engaged till you found neutral then there was zero whine while operating. This is now at any movement in the drive controls and at all rpms. I just pulled the case drain filters and they look good.
  3. S

    Bobcat T190 centering device issues

    Okay then it’s def not that. No real difference besides severe whine. No power loss no shutter. Any other ideas?
  4. S

    Bobcat T190 centering device issues

    No there’s actually no whine until you move the controls to drive. Almost like the breaks engaged really. But it’s reading off. No codes
  5. S

    Bobcat T190 centering device issues

    So I finally got around to replacing all the seals and lever parts. Creep is completely gone and no leaks! Win. But now I have drive whine. No lift whine. Everything was cleaned extensively before changing out so I’m lost as to why. Any recommendations? It had zero whine prior.
  6. S

    Bobcat T190 lift issues

    Update in case anyone runs into a similar situation. I unplugged both actuators and battery terminals, let sit while replacing alternator. Plugged everything back in, everything works and no more code.
  7. S

    Bobcat T190 lift issues

    So my battery light came on the other day and I started to drive it back to the trailer. I got about half way there and the hydos started kicking in and out so I shut her down and replaced the battery. I start it up no battery light but ACS lights now on. Will drive fine but nothing at the...
  8. S

    Bobcat T190 centering device issues

    Perfect, thanks a bunch guys I really appreciate your time.
  9. S

    Bobcat T190 centering device issues

    Can the Pintle shaft seal be replaced in the unit? Do you know of any write ups on the process of how to do it?
  10. S

    Bobcat T190 centering device issues

    Perfect, thanks again!
  11. S

    Bobcat T190 centering device issues

    Thanks crewcheif, I ripped it apart yesterday and everything you said is correct. The arm was completely loose and barely catching the shaft. Now on to finding a parts manual. I found willies thread and it helped a bunch. I appreciate your response, this is all very new to me!
  12. S

    Bobcat T190 centering device issues

    Hello all, new to the site and bobcat repairs. I have a T190 that has starting issues (from not centering) and major creeping. Pulled the cab up and this is the mess I'm dealing with... its even got some wood in there.. FML any advice?
See more
Top