• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Rosky

  1. R

    PC200LC-8 / A89-

    Hello, I have an PC200LC-8 that has no error codes. Machine ran perfect a day before and upon cold start the next day I instantly had this issue. tracks slow on 1 side unless I stick out and it speeds up Swings Slow Left or Right Until I Stick out or bucket curl then speeds up Slow Stick...
  2. R

    sevice manuals

    Cat 324EL Manuals please, Thank you sir you are Great! roskycl@yahoo.com
  3. R

    sevice manuals

    Hi, Need manuals for Hitachi EX200-3 and Kobelco Sk330LC - SN, Yc06 Roskycl@yahoo.com
  4. R

    Hitachi EX200-3 Pump Stalling Engine

    here are videos that kinda show what its doing shitty footage but i am only one person. also attached pics of the valve block if anyone can point out where the screen is located that needs to be cleaned and also the main relief valve https://imgur.com/YTE4IBn https://imgur.com/cXNidYR...
  5. R

    Hitachi EX200-3 Pump Stalling Engine

    And over a Year later still working on this 200-3, we installed a new harness, sensors, the works pretty much only thing haven't touched is the pvc, since before, the pump is no longer stalling the engine problem is now the machine won't move at all unless use both pumps but one or the other...
  6. R

    Ex200-3 LC Aux Attachments

    Hello, I have an fairly decent ex200-3 that came with aux hydraulics already attached, I'm curious does the aux hydraulics have its own pump & flow rate or does it work off of the main pump and flow rate? if its own does anyone know the flow rate of the aux hydraulic option? I think the main...
  7. R

    you still have the harness for the hitachi 200-3? how much do you want for it?

    you still have the harness for the hitachi 200-3? how much do you want for it?
    • Rosky
    • Profile post
  8. R

    Hitachi EX200-3 Pump Stalling Engine

    Can't find anyone with Dr ex will John Deere service advisor software work? The guy said he could download all different brands of machines.
  9. R

    Hitachi EX200-3 Pump Stalling Engine

    got both computers out and on top everything seems fine but underneath there is like this rust type of residue, anyone know why is that? I'm going to look into the harness a bit more I knew from the beginning it was a bit suspect but for the most part non of the wires are actually cracking on...
  10. R

    Hitachi EX200-3 Pump Stalling Engine

    Didn't hear any change or anything and the machine was still the same. So I went and bought new DP Sensor, Solenoids, and also an Angle sensor which for some reason wouldn't get to 4.4volts it was reading 3.8-4.2volts but the old one would adjust perfectly to 4.4 volts when moved correctly...
  11. R

    Hitachi EX200-3 Pump Stalling Engine

    Take it out of limp mode first? Now that you mention it, I use to hear those solenoids making chattering noise, and now it doesn't anymore at least not while idle when it is not in limp mode. Both computers are flashing red 1 second on 1 second off, even after I disconnect sensors.
  12. R

    Hitachi EX200-3 Pump Stalling Engine

    the hrs meter is dead on it i would guess about 9000+ hrs I was able to put it into limp mode to move it around the pump seemed to be fine in limp mode, machine ran but ran as you would expect it to in limp mode. Is there anyway to really tell if the DP, Angle, High/Low Solenoids are...
  13. R

    Hitachi EX200-3 Pump Stalling Engine

    Hello, I Have a Older Hitachi machine and I'm trying to figure out whats going on with the pump. So here's the problem, On start up you can hear the pump stroke up, If you try and operate any controls the machine stalls and sometimes shuts off, the machine wont rev very high at all...
  14. R

    Kobelco hydraulic excavators

    I broke that sensor replacing a hose, I looked it up, I think its a low pressure sensor, Would this be the direct issue the machine is having?
  15. R

    Kobelco hydraulic excavators

    2004 KOBELCO SK330 LC DYNAMIC ACERA Hello, on my 330 Yesterday it was working normal its had its issues but while working it I let the machine idle and when I tried to move again nothing happened, the machine would move extremely slow or not at all. the pump was replaced maybe 900 hours ago...
See more
Top