• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Rio_Grande

  1. R

    CTL 70 no power/start

    Thanks for the help everyone.
  2. R

    CTL 70 no power/start

    Found it, hot wire corroded in two at the connector between the switch and fuse block.
  3. R

    CTL 70 no power/start

    Did that as best we could, switch on or off dosent effect anything at the battery. We had 11 v at the ign switch, but only 1.5-2 at the fuse block. I picked up a new switch today.
  4. R

    CTL 70 no power/start

    Ok, couldn't seem to get the console unplugged but was able to lift it high enough to get the keys switch out. It tested odd. With the key off one terminal has 11 volts of power. When I turn the key on all power goes away. What I thought was the hot lead goes to 0v. Assuming it's shorting...
  5. R

    CTL 70 no power/start

    Had time last night. Started pulling apart the coverings to get to the wiring. According to the wiring diagram, everything in the fuse box but the horn is switched power. hopefully Friday I can get the covers off and test the power going into the switch. If it's 12 volts I will order a new switch.
  6. R

    CTL 70 no power/start

    Thanks!!
  7. R

    CTL 70 no power/start

    Thanks!
  8. R

    CTL 70 no power/start

    Found today I only have1.5- 2 v in the fuse box. Trying to determine if I have 12 v into the switch.
  9. R

    CTL 70 no power/start

    Miller marine, did you have any luck? Thanks again.
  10. R

    CTL 70 no power/start

    The sn is 21403405 thanks
  11. R

    CTL 70 no power/start

    Thanks will get it tomorrow when I am at the shop!
  12. R

    CTL 70 no power/start

    Anyone know where I can get a wiring diagram. The dealer only has the one in the parts manual and it is not much help.
  13. R

    CTL 70 no power/start

    Ok what I found the other day was several ribbon looking plugs and a couple jumper looking connectors on the board end. It all looked really fragile to my big mitts!
  14. R

    CTL 70 no power/start

    Mullermarine that is exactly how this is set up to remove the gauge cluster. Where do you disconnect the wires to remove the cover. I have been told not to remove them from the circuit board that the harness unplugs but I can't find that connection or the connection for the switch.
  15. R

    CTL 70 no power/start

    Yes let me figure out how
See more
Top