• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by rezod1

  1. rezod1

    1946 D8 2U looking for seat and a hood, where to find?

    Recently acquired this 8 and would like to find the upper and lower bench seat and a hood. Thank you
  2. rezod1

    Terex/ASV PT-110 Error Code

    I have a 2015 pt110, showing a code of 97-15. Any idea on that?? Thanks in advance
  3. rezod1

    Which is better, v blade or KG?

    let the opinions fly, looking at cutting a timber logged 8 years ago, like to use D65-15 as I have that tractor. Will it perform? Heavy enough? Read that D7Es and Gs worked well but 8H and K are more weight for better grunt and the D9 is unstoppable. Really not looking to buy a bigger machine if...
  4. rezod1

    Sharpco V-blade

    anyone run a sharpco v blade on a 200hp machine? Komatsu D65-15 size dozer? Have a project cutting an 8 year old logged timber over 800 acres, is a KG blade better?
  5. rezod1

    Terex ts14g scraper electrical issues

    Anyone able to diagnose electrical issues on this machine? Fault code is 052 fo. Seems difficult to find a expert on this machine, it has the 466 motors. Fails to go into any gear. Open to any information, machine located in central Illinois
  6. rezod1

    Case 1550 Dozer

    Cat 236 I had two of those machines, both ran well for 2000 hours and then started having hydraulic line issues. They were very good finish grade dozers with power angle tilt blades and good floatation and power to weight control. Our problems were vibration on the clamps holding the hydraulic...
  7. rezod1

    Icon pans, operator opinions wanted

    Looking at Icon 821 pan, anyone have opinion on these as far as loading, dependability and so on. thanks
  8. rezod1

    Terex TS-24. Thoughts and valueation for pond project.

    All good information for you fastline, 24s big, heavy and hard to find parts. 14 is better for getting around and resale, but buying used can and usually does mean abused which equals expensive repairs. As a contractor, buying a unknown machine for 100 hour job is a huge risk and big gamble...
  9. rezod1

    Who uses a skid steer only at home?

    We have a case 70xt 2005 model, use it for lots of projects commercial and home, great for moving things like firewood and brush around and filling in wash outs, grading the drive and taking out the trash. We even use the broom to sweep leaves and gravel out of the yard, sure beats a wrake like...
  10. rezod1

    JCB 214 transmission

    I have a 1997 sitemaster, it has jumped out of gear in the past but was a bad relay issue. They have relays for most functions so check electrical system first. Have had my machine for 10 years with no other issues, a good work horse.
  11. rezod1

    Reynolds out of business!

    Splunk Where are you located? would like to look at the deere 2112 scraper pan. Thanks
  12. rezod1

    komatsu 156 backhoe- anyone have any concerns on one?

    Found a komatsu 156 hoe thats fully plumbed for sale. Anyone had any time in one?? seem to be pretty well put together and run smooth. Thanks
  13. rezod1

    Purchasing pull pans, need likes/ dislikes

    Going to add a few more pull pans and am looking at the 21 yard icon scraper. anyone have opinion on likes/dislikes of that model? Would be interested on information about other brands that work well and have good floatation. We do a lot of stripping topsoils, but also move heavy clay material...
  14. rezod1

    Cx210 case electrical and cummins engine problem

    Hatchequip, looks like its worse case scenario for my 240. had head removed after compression test showed number 5 cylinder extremely low on compression, found broken ring and scored cylinder wall. going to take it down to bare block, resleeve number 5 and hone the others. seems electrical...
  15. rezod1

    Finish Grading Tips

    time in the seat, and a good teacher best for beginers. problem is no one wants to baby sit new operators. but having a small amount of material in front of the blade does help considerably, especially on smaller short tracked machines.
See more
Top