• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by razerface

  1. R

    TZ50 emergency hand pump

    Genie lift
  2. R

    TZ50 emergency hand pump

    No ideas?
  3. R

    TZ50 emergency hand pump

    my tz50 has a hydraulic hand pump on the hyd manifold with the solenoids for boom movements, used to move lift components up or down when the lift is inoperative/emergency. It does not do anything when i pump it. I removed it, and it has suction and seems to work when moved by hand. Hyd oil did...
  4. R

    TZ50 auto level

    Finally decided to go ahead and order the level module. I can find nothing else wrong. It will be here next week.
  5. R

    TZ50 auto level

    I replaced the timer. It auto leveled twice with the back slightly high. I will play with the timing now as soon as i get back from vacation. The new timer makes a buzzing noise while the old one was silent. As i turn the timer knob, the buzzing noise changes length matching my adjustment. I am...
  6. R

    TZ50 auto level

    I changed out the relay with an unused one. No change. I am going to replace the timer. As i play with everything, the timer seems to influence everything. I try adjusting it like the tech tip says, and it goes from no leveling at all to extending the legs all the way,,no in-between.
  7. R

    TZ50 auto level

    I started working again after i posted above comments on what it did yesterday. Now it does nothing again when i try to auto level,,unless while holding the yellow and autolevel buttons, i quickly press and release any of the four outrigger buttons. Then it starts to auto level, but usually...
  8. R

    TZ50 auto level

    I dont know why, but now it works halfway. When i hold the buttons, the legs come down until they all contact the ground, the back raises, then it all stops and the level module starts beeping. It seems to take a long time for this to happen too, very slowly. I have done nothing but trace...
  9. R

    TZ50 auto level

    Thanks, Sent you a pm. I have the service manual downloadable from genie, but it does not give specifics on working on the leveling system. You have something that does give hints?
  10. R

    TZ50 auto level

    Well, that tech tip paper is only half there. It stops after step 5. It lists step 6, but the step is blank and does not say what to do with the 7/16 wrench. The tip on noisy turntable has incorrect p/n on it. Figured that out after 40 minutes of phone calls. Too tired to call about this one...
  11. R

    TZ50 auto level

    My symptoms are not in that pdf, but i am going to do all those tests anyway, just in case! It gives me a great place to start. I did find other useful stuff in those tech tips too, thanks! I did not know about that tip section.
  12. R

    TZ50 auto level

    Anybody?
  13. R

    TZ50 auto level

    Anybody know?
  14. R

    TZ50 auto level

    i fixed the basket auto level, now i need to fix the machine auto level. Nothing happens when i press the auto level button. The stabilizers will go down when i do them manually, or each button seperately. Where do i start to troubleshoot this? Is the autolevel module testable?
  15. R

    TZ50 basket self level not working

    Well, rebuilding the cylinder did not help. I did find the problems. The previous owner put the hyd lines on backwards, and the solenoid connections were backwards on the slave cylinder. Works perfectly now. On to the next problem, self leveling.
See more
Top