• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Questionable wizard

  1. Q

    Bell 4206D Loss of Hydraulic Function

    With the engine running, can you feel the hum of vibration on the discharge hydraulic line coming from the hydraulic pump? I.E., oil flowing through the line?
  2. Q

    Bell 4206D Loss of Hydraulic Function

    First question to get a better picture of the situation, is this an electrical problem, or mechanical problem? On the 4206D I had experience with, the hydraulic pump coupler at the bellhousing wore out.
  3. Q

    Cat 615c issues

    What servicing have you done to the machine since you purchased it? Did you take oil samples before servicing it? How many hours does it show? Serial number? What's the previous history of the machine? Seldom do business owners get rid of a perfectly working machine. I believe there is a...
  4. Q

    Eye candy

    I asked about the labor to rebuild. At least 2500 man hours. The pictures are of the one in the first post and had the transmission removed in another pic.
  5. Q

    New Terex TS24D

    I thoroughly enjoy the rebuild/refurbish side. If it were profitable, I'd do it more than a hobby. I'm looking hard at wire harness fabrication. One downfall of all the white ones.
  6. Q

    Eye candy

    I'll ask the next time I'm there about man hours. I've been told by my PSSR roughly 75% cost of new depending on the damage needed repaired. The picture with the front transmission removed, they had a clutch disc disintegrate generating material when they were drive testing it and had to open...
  7. Q

    Eye candy

    A few more
  8. Q

    Eye candy

    More
  9. Q

    Eye candy

    Another candidate, same process.
  10. Q

    Eye candy

    More progress. The original tractor end burned. They are refurbishing a salvage tractor end to mate with the rear.
  11. Q

    Eye candy

    I believe this is a 627G. Everyone was on lunch break when I walked through at Ohio Cat Columbus branch. I'll try to add pictures over the next several weeks on their progress.
  12. Q

    TS14 Tranny

    What gear? I'd guess a clutch pack starts slipping under the high torque. Take an oil sample.
  13. Q

    TS14 Tranny

    I'm interested in the entire package. I'll get back with you after the 30th. I'm waiting on a customer's check to clear. Deere stopped production on those transmissions in 2010. Parts are still available, but pricey. I will go thru both transmissions completely before I consider them safe...
  14. Q

    TS14 Tranny

    I'm interested in them. How much for them? Message me. jcatinflationsolutionsdotcom
  15. Q

    TS14 Tranny

    What's wrong with the transmission?
See more
Top