• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by powerjoke

  1. powerjoke

    My okada hammer is not working wtf

    Ok so here's an update, I still haven't out my eyes on the breaker yet however he called a guy to rebuild his as well as look at mine. He said there was absolutely no nitrogen in it and when they pulled the plug oil ran out of the accumulator...... just a bad diaphragm right ?
  2. powerjoke

    My okada hammer is not working wtf

    ....
  3. powerjoke

    My okada hammer is not working wtf

    First thought too however it Does same thing either direction.
  4. powerjoke

    My okada hammer is not working wtf

    My okada 312B has served us well for quite sometime and has been reliable, so much so that when a good friend asked to borrow it because his Kent blew the seals I had no reservations about loaning it to him, however it will not work he says that one line gets hard and even with the other line...
  5. powerjoke

    Hydrostat loses power in reverse when warm need help. Bomag BW160

    I'll check the pump for a tag tomorrow, I ordered a service manual for it but haven't got it yet. Thanks for the ideas Pj
  6. powerjoke

    Hydrostat loses power in reverse when warm need help. Bomag BW160

    I haven't had too much of a chance to look into it and but just wanted to see if anyone ran across this before, Works great when cool but after about 15min she starts losing reverse power and then a few minutes later loses nearly all, however forward is still strong as hell. I bought the...
  7. powerjoke

    Spectra CR600 receiver

    We have a couple of them it'll get you close but not spot on yes it will definatly cut down your times, just be careful we have had a lot of trouble with the receivers especially if they spend too much time on the magnet getting beat around on the end of a stick, we normally trash one a year for...
  8. powerjoke

    Ram self propelled drop hammer, need parts

    I'm also going to ask another dumb question, It came with 3 points, chisel, blunt, and a flat blade. What are the applications of each ? My hydraulic breakers just have a chisel point on them,...... The reason I ask is because this thing doesn't really have much practical use other than flat...
  9. powerjoke

    Ram self propelled drop hammer, need parts

    Jerry that looks to be the one I need thanks! rick
  10. powerjoke

    Ram self propelled drop hammer, need parts

    It operates by just simply turning on the hammer switch and then holding fwd or rev button down and it smacks the ground delays then travels smacks and repeats all with just holding one button but the damn thing seems to sometimes work right and sometimes wait about 30sec before lifting and...
  11. powerjoke

    Ram self propelled drop hammer, need parts

    I bought this hammer at auction and suprise suprise it doesn't work properly, I believe it needs a timer as everything else seems to point in that direction, the company is out of business and all the numbers on manuals and machine are disconnected...... Here is a pic of the timer it is a...
  12. powerjoke

    Pc228 no hydraulics please help!

    Being able to let the boom/stick down we have to have a good pressure reducing valve and pilot circuit ? If the main pump is bad why wouldn't one side of the pump at least try to operate some function ? Merge valve problem ?
  13. powerjoke

    Pc228 no hydraulics please help!

    I just went back and re read this thread after working on the machine again today and it's got me confused again lol. Any new ideas ? I'm affraid we might have a bad pump, I pulled the epc valves and found traces of metal, the pump closest to the motor has a lot of pressure (not sure how much I...
  14. powerjoke

    Hydraulic pump rebuilders ??

    Thanks guys im still trying to narrow it down I had a little time to work on the machine today im affraid it's coming to a pump failure though Pj
  15. powerjoke

    Hydraulic pump rebuilders ??

    who does everyone use to rebuild hydraulic main pumps ? I have a komatsu 228-3 that needs one. Pj
Top