• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Powder222

  1. P

    Allmand 425 Backhoe motor pulling down

    I got my backhoe fixed. It was a broken O ring on a relief valve on the gear pump which is on the back of the hydrostat. Replaced the Oring and everything works good again. Amazing what a broke O ring can cause.
  2. P

    Allmand 425 Backhoe motor pulling down

    Well I got my backhoe fixed today. turned out an O ring on a relief valve on the gear pump behind the Hydrostat had broke. It is a hard O ring. Replaced it and everything is working once again. Just amazing what a mess an O ring can cause.
  3. P

    Allmand 425 Backhoe motor pulling down

    Good Day,,, I had someone else get on it and come up a hill and when it pulled down it put out more smoke than i had thought it was. I drained the fuel tank and the fuel was very clean. Guess it time to dig into the hydraulics'.
  4. P

    Allmand 425 Backhoe motor pulling down

    Yes, I still have the filters,, . As for fuel ,it get filled up regularly as I use it for a lot of different things here on 5 acres. it get used at least once a week and I start it every couple of days if Im not useing it. It doesn't have a big tank and 5 gallons will fill it most times
  5. P

    Allmand 425 Backhoe motor pulling down

    I have extended the bucket and boom and didn't notice any pull down . I didn't try any digging as its sitting on concrete. The engine seems to run good. Starts easy,, Ill try and put some preasure on the bucket and boom,,, Thanks for your response
  6. P

    Allmand 425 Backhoe motor pulling down

    Thank you,,, I guess ya do what ya gotta do. Looks like my next step is try to hook up a gauge somewhere to see how much pressure my pump is pumping. Also find out what it should be be. Im learning.
  7. P

    Allmand 425 Backhoe motor pulling down

    I was moving some dirt ,working on a washout, I noticed the steering made a little noise and got hard a couple times and then as I was bringing the last bucket of dirt the engine started pulling down as i turned into my driveway . I shut it off and checked everything. Then started it back up...
  8. P

    Allmand 425 Backhoe motor pulling down

    I replaced the filters,,, they are new
  9. P

    Allmand 425 Backhoe motor pulling down

    Thank you for your ideas,,, Ill check it out
  10. P

    Allmand 425 Backhoe motor pulling down

    I took some pictures,,, not sure what kind of pump it is. looks like its attached to motor
  11. P

    Allmand 425 Backhoe motor pulling down

  12. P

    Allmand 425 Backhoe motor pulling down

    Ok,,, I went out and took some pictures,,, It does puff a small amount of smoke when it pulls down just before it would stall the motor if I kept mashing the forward pedal
  13. P

    Allmand 425 Backhoe motor pulling down

    Here are some pictures of what Im working on.
  14. P

    Allmand 425 Backhoe motor pulling down

    Its an 2005 year model. The engine runs good . Ill have to look and see where the pump hooks up. All I ever done to engine was change glow plugs and a new water pump. beside oil changes,, . Im a 70 year old female and Im kinda lost with this. Thanks for your responce
  15. P

    Allmand 425 Backhoe motor pulling down

    Its full of Hydraulic fluid,, there is no pto shut off as it is a full time backhoe. im new to all this as ive never had any problems with it in the 5 years Ive had it
See more
Top