• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by posrepair2013

  1. posrepair2013

    Coyote loaders

    Seal has dimensions numbers on it , the outside seal that keeps grease and oil separate inside diameter is 49mm witch every place tells me 50mm is all they have. the inner seal if u look in pic is a 2 piece it has this rubber spacer/ dust seal piece that goes on first then normal double lip oil...
  2. posrepair2013

    Coyote loaders

    I wish this coyote would fix itself
  3. posrepair2013

    Coyote loaders

    They are out of business i have right rear wheel seal leak and the seals are impossible to find. I have tried every where and have not came up with anything so far.
  4. posrepair2013

    Coyote loaders

    I have a customer with a coyote loader the only tag I find is in cab it says model is cs910 and serial is y150032. I can not locate any dealer to get parts. Any help would be greatly appreciated.
  5. posrepair2013

    JOHN DEERE 790D seized up

    pull injectors or glow plugs if it has them. Than try and bar engine over maybe hydro locked
  6. posrepair2013

    Linkbelt 290lx "electrical prob"

    Hi everyone I have one of those problem machines. Its a linkbelt 290 lx serial# K5j7-1008. First problem was crank no start had code m00b0 trouble tree said "replace engine controller". Before doing that I checked all powers and ground to engine controller. Installed new controller code went...
  7. posrepair2013

    Linkbelt 290lx wiring

    I have a linkbelt 290lx I am working on crank no start. I get no power to injection pump all fuses and relays good. On information monitor it says electrical problem. It died while operating. Looking to see if anyone has manual or wiring diagram it has Isuzu engine. Thank you
  8. posrepair2013

    Cat cb-114 manual!!!!

    yes hatz engine
  9. posrepair2013

    Cat cb-114 manual!!!!

    I was thinking of just converting it to throttle honestly
  10. posrepair2013

    Cat cb-114 manual!!!!

    My mistake
  11. posrepair2013

    Cat cb-114 manual!!!!

    and 2 wires going to throttle solenoid
  12. posrepair2013

    Cat cb-114 manual!!!!

    This is what they wired in one wire going to switch 2 wires going battery +
  13. posrepair2013

    Cat cb-114 manual!!!!

    do u have wiring for that circuit? Or atleast explain how it works then I atheist have direction chasing the wires
  14. posrepair2013

    Cat cb-114 manual!!!!

    Thats what it is 3 wires but someone cut out plug and rewired circuit and nothing is working. Customer got unit on auction
  15. posrepair2013

    Cat cb-114 manual!!!!

    It a customer of mine. It has a high low idle switch I need wiring diagram for that circuit. It has hatz diesel. Thanks
See more
Top