• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by phx

  1. P

    what is missing in this picture - skytrak 10042

    VERY helpful. THANKS!
  2. P

    what is missing in this picture - skytrak 10042

    Thanks - I assume it was disconnected because of a leak. I snapped up a brand new one on ebay. Does this splice into the engine coolant or does it have its own unique reservoir, pump and radiator (looks like there are two radiator condensers).
  3. P

    what is missing in this picture - skytrak 10042

    Unsure what these should connect to on top of fuel injector assembly on cummins 3.9
  4. P

    skytrack 10042 main boom hoses

    Thanks - its cold when I noticed the level lower than normal.
  5. P

    skytrack 10042 main boom hoses

    I have a skytrack 10042 and I noticed the two larger main boom hoses were sun baked so bought a pair months ago. Today I inspected and found a hint of fluid wetness so I need to replace with urgency. two questions 1) is there any system bleeding necessary after hose replacement? 2)...
  6. P

    skytrak 10042 leans over left if parked not perfectly level

    Thank you for your reply. The valves have 2 different part numbers - i surmise its for a different "crack" PSI. If these are highly suspect i am going to drop $100 on a fresh pair and move on. Any advice on where to block the frame correctly. I havent looked yet - maybe its obvious.
  7. P

    skytrak 10042 leans over left if parked not perfectly level

    Sorry to bump thread up - was hoping someone who has hands on experience with this model/circuit can assist. Thanks!
  8. P

    skytrak 10042 leans over left if parked not perfectly level

    thanks - is it unsafe to use? So far if i parked it for a few days it can start to sag unless i put some effort into getting it vertical.
  9. P

    skytrak 10042 leans over left if parked not perfectly level

    If i park my 10042 telehandler with a small lean to the left after a few days it seems to bleed down and tilt left. I looked at http://www.gcironparts.com/GCIronPartsSelection.asp?manuID=10&catID=59&prodID=122573&ssID=21723&highlight=48545 And i see #7 and #8 valve choke/check and assume...
Top