• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Pete Dirt

  1. P

    EX200-3 Hydraulic Pump Conversion Kit

    I heard or read that it didn't work for the John Deere's because the computer also added power to the engine at full load. There might be a work around for that.
  2. P

    EX200-3 Hydraulic Pump Conversion Kit

    We got a mechanic in he looked the diagrams over and changed 1 hose around. Then he said that the linkage in our pump was loose so the pump stuck at full stroke, we should add a washer or two to the plate at the bottom of the pump to move it up from full stroke. We started the machine, it was...
  3. P

    EX200-3 Hydraulic Pump Conversion Kit

    These are the instructions for the spring, plunger, shims, there is supposed to be one shim above and one below the thick part of the plunger then add for more pressure remove for less. The small plunger is only for some machines. I found no place for the small heavy spring. The hoses go a fair...
  4. P

    EX200-3 Hydraulic Pump Conversion Kit

    We are in the middle of installing a conversion kit on a EX200-2, ordered on eBay with english instructions. The instructions aren't the best, but if I can find a way, I'll send them to you. But now the pump remains at full stroke and we are searching for information to change that. The suppler...
See more
Top